| AMI UEFC206-19 Mounted Units & Inserts | d1:176.213 mm; Hydraulic nut:HMVC 38E; B:28.829 mm; d:190 mm; Mass adapter sleeve assembly:12.5 kg; B1:171.399 mm; Lock washer:W 38; Lock nut:AN 38; G:189.789 mm; Sleeve:S 138x6.15/16; |
| AMI UC316 Insert Bearings Spherical OD | ra max.:0.15 mm; Fatigue load limit Pu:0.006 kN; D2 ≈:9.9 mm; da max.:6.7 mm; D:11 mm; Limiting speed:60000 r/min; Basic static load rating C0:0.143 kN; da min.:6.2 mm; Basic dynamic load rating C:0.403 kN; Da max.:10 mm; |
| AMI UKFL206+H2306 Flange Block Bearings | Basic static load rating C0:10800 kN; Mass bearing:507 kg; Limiting speed:1100 r/min; Basic dynamic load rating C:5940 kN; Reference speed:630 r/min; F:547 mm; ra max.:6 mm; s max.:16 mm; d:480 mm; Fatigue load limit Pu:800 kN; |
| AMI UCST212TC Mounted Units & Inserts | r1,2 min.:0.4 mm; da max.:11.8 mm; d:9.525 mm; D2 ≈:19.9 mm; Basic dynamic load rating C:2.47 kN; D:22.225 mm; Calculation factor f0:10.2; Mass bearing:0.012 kg; Calculation factor kr:0.025; ra max.:0.4 mm; |
| AMI CUCF215C Flange Block Bearings | Basic Dynamic Radial Load Rating C:60500 N; B:39.70 mm; D:90.0000 mm; Oil Speed Rating n2:6700 rpm; Basic Static Radial Load Rating Co:43000 N; Sealed Speed Rating n3:5000 rpm; Grease Speed Rating n1:5000 rpm; Accessories:Two Seals & Snap-Rin; Fillet Radius ra:1.50 mm; d:40.000 mm; |
| AMI MUCHPL201-8CB Hanger Unit Bearings | Threads per inch:8; Mass adapter sleeve assembly:8.85 kg; Lock nut:AN 34; Sleeve:S 34x6; B:27.254 mm; B4:30.963 mm; Lock washer:W 34; B1:122.86 mm; G:169.139 mm; d1:152.4 mm; |
| AMI UCMFB206-17MZ2RF Mounted Units & Inserts | Sealed Speed Rating n3:10000 rpm; Grease Speed Rating Open/Shielded n1:16000 rpm; D:42.0000 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; Accessories:Two Shields; B:9.00 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:6630 N; d:25.000 mm; Basic Static Radial Load Rating Co:4150 N; |
| AMI MUCFB206 Flange Block Bearings | RG:3/8 NPT; P60°:149 kN; Da:200 mm; PG:1/4 NPT; Stabilizing ring:SR-22-19; Cap bolt recommended tightening torque:203.4 N·m; Max. speed for Taconite seal:625 r/min; h:45.244 mm; Cap bolt, SAE grade:5; A1:120.65 mm; |
| AMI BTM201-8 Flange Block Bearings | Grease:279 kN; Dynamic (Cr):3 mm; with cylindrical bore:3 000 min-1; B:43 mm; Static (Cor):5.5 mm; rs (min):2 mm; D:120 mm; Pu:230 kN; d:55 mm; with tapered bore:3 800 min-1; |
| AMI UCFB207-22 Flange Block Bearings | Tolerance shaft:e7; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; B:10 mm; D:14 mm; Mass bushing:0.008 kg; Coefficient of friction µ max.:0.15; d:9 mm; Permissible sliding velocity v max.:0.5 m/s; |
| AMI UEFCF205-16TCMZ20 Mounted Units & Inserts | Fw:42 mm; Limiting speed:11000 r/min; Fatigue load limit Pu:9 kN; Reference speed:10000 r/min; Mass needle roller and cage assembly:0.054 kg; Basic static load rating C0:76.5 kN; U:30 mm; Basic dynamic load rating C:31.9 kN; Ew:47 mm; |
| AMI UGCJTZ208 Flange Block Bearings | Reference speed:670 r/min; Basic dynamic load rating C:247 kN; D1 ≈:504 mm; Fatigue load limit Pu:26 kN; Minimum load factor A:14; D:600 mm; d1 ≈:596 mm; H:60 mm; Limiting speed:950 r/min; r1,2 min.:2.1 mm; |
| AMI UKP208+HE2308 Pillow Block Bearings | Limiting speed:2200 r/min; Reference speed:1100 r/min; Mass roller and cage thrust assembly:0.93 kg; Eb:146 mm; Shaft washer:WS 89317; Dw:12 mm; Ea:93 mm; Basic dynamic load rating C:255 kN; Roller and cage thrust assembly:K 89317 M; D:150 mm; |
| AMI UGCJTZ207-23 Flange Block Bearings | D:180.0000 mm; d:85.000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:4300 rpm; B:41.00 mm; Basic Static Radial Load Rating Co:132000 N; Grease Speed Rating n1:3200 rpm; |