| AMI UCMFB208-24MZ20RF Mounted Units & Inserts | Stabilizing ring:SR-36-30; Cap bolt recommended tightening torque:203.4 N·m; P180°:89 kN; Ca:95.809 mm; Da:319.999 mm; R1:114.3 mm; End plug (suffix Y):EPR 21; da:180 mm; Housing:SAF 236; Lock washer:W 36; |
| AMI UKFL213+HA2313 Mounted Units & Inserts | R1:5.5 mm; Hexagonal key size for grub screw N:5.556 mm; SWN:11.113 mm; Basic dynamic load rating C:66.3 kN; Thread grub screw G2:7/16-20 UNF; L:279 mm; RG:1/8-27 NPT; Basic static load rating C0:49 kN; N1:22 mm; GN:1/8-27 NPT; |
| AMI UEFCF206-20TCMZ20 Mounted Units & Inserts | r, r1,2 min.:0.3 mm; Mass inner ring:0.054 kg; B:30 mm; d:22 mm; F:28 mm; |
| AMI MUCFB209NP Mounted Units & Inserts | Oil Speed Rating Open/Shielded n2:1400 rpm; B:74.00 mm; D:480.0000 mm; d:320.000 mm; Basic Dynamic Radial Load Rating C:371000 N; Basic Static Radial Load Rating Co:540000 N; Sealed Speed Rating n3:730 rpm; Accessories:One Seal; Grease Speed Rating Open/Shielded n1:1100 rpm; Fillet Radius ra:3.00 mm; |
| AMI UCFX12-39 Flange Block Bearings | r1,2 min.:23 mm; Design variant/feature:BC4.18/W33GWI; C:400 mm; Basic dynamic load rating C:5940 kN; Mass bearing:275 kg; Fatigue load limit Pu:1250 kN; D1 ≈:514.3 mm; D:560 mm; r3,4 min.:2 mm; α:20 °; |
| AMI MUCFT205-14NPRF Mounted Units & Inserts | Mass inner ring:0.04 kg; F:35 mm; B:20.5 mm; d:30 mm; r, r1,2 min.:0.3 mm; |
| AMI UENTPL206-18CW Mounted Units & Inserts | with tapered bore:1 800 min-1; B:62 mm; Pu:430 kN; with cylindrical bore:1 500 min-1; Grease:648 kN; rs (min):2 mm; D:200 mm; d:120 mm; Oil:68.630 kN; Static (Cor):8.3 mm; |
| AMI UCTPL204-12MZ20RFCEW Mounted Units & Inserts | Threads per inch:12; Hydraulic nut:HMVC 18E; B:17.729 mm; G:89.586 mm; d1:82.55 mm; Mass adapter sleeve assembly:1.4 kg; Lock nut:AN 18; Sleeve:S 18x3.1/4; d:90 mm; B4:19.863 mm; |
| AMI KHP210 Mounted Units & Inserts | Specific dynamic load factor K:10 N/mm²; B:6 mm; Permissible sliding velocity v min.:0.25 m/s; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Permissible sliding velocity v max.:5 m/s; Specific static load factor K0:20 N/mm²; Mass bushing:0.002 kg; D:12 mm; d:8 mm; |
| AMI UCST209NPMZ2 Take Up Unit Bearings | Accessories:88000 Two Seals; Fillet Radius ra:0.64 mm; Basic Interchange BCA:-; d:11.000 mm; Basic Radial Load Rating-Static SCO:3000 N; Old MRC Bearing Number:-; Basic Interchange NDH:88011; Basic Interchange FAF:-; Basic Radial Load Rating-Dynamic DC:6760 N; Width - Inner Ring B1:15.40 mm; |
| AMI UCX07-20 Mounted Units & Inserts | da max.:70 mm; B:22 mm; Fatigue load limit Pu:13.2 kN; Cb min.:4.5 mm; Ca min.:3 mm; Limiting speed:6000 r/min; Basic dynamic load rating C:120 kN; Dimension series:3EB; Db min.:103 mm; Calculation factor e:0.4; |
| AMI UCMST206-17MZ2 Mounted Units & Inserts | Basic Static Radial Load Rating Co:114000 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3900 rpm; D:160.0000 mm; B:37.00 mm; Basic Dynamic Radial Load Rating C:138000 N; Oil Speed Rating n2:5000 rpm; d:75.000 mm; Fillet Radius rb:1.00 mm; |
| AMI UELP209TC Pillow Block Bearings | End plug (suffix Y):EPR 16; A1:158.75 mm; Bearing:22230 CCK/W33; Max. speed for Taconite seal:590 r/min; Stabilizing ring:SR-30-0; Ca:82.804 mm; P90°:236 kN; S:4.763 mm; R1:95.25 mm; Mass pillow block:115 kg; |
| AMI UCMFL202MZ2 Mounted Units & Inserts | D:400 mm; B:104 mm; with cylindrical bore:900 min-1; Oil:237.810 kN; Static (Cor):16.7 mm; Grease:572 kN; rs (min):4 mm; Dynamic (Cr):9 mm; with tapered bore:1 200 min-1; Pu:365 kN; |