| AMI MUCFPL206W Flange Block Bearings | Pa:89 kN; R1:163.512 mm; End plug (suffix Y):X-5217-2; P120°:249 kN; Cap bolt, SAE grade:8; P150°:222 kN; RG:1 NPT; Adapter sleeve assembly:SNP 3056x10.7/16; H:495.3 mm; H2:101.6 mm; |
| AMI UC210-31C4HR5 Mounted Units & Inserts | d:100 mm; Mass inner ring:0.8 kg; r, r1,2 min.:1.1 mm; B:40 mm; F:115 mm; |
| AMI UCFL214C4HR23 Flange Block Bearings | S:0.794 mm; da:42.862 mm; Attachment bolt diameter G:12.7 mm; J max.:161.925 mm; L:200.025 mm; H:107.95 mm; Basic dynamic load rating C:102 kN; H1:53.975 mm; s:29.766 mm; Mass bearing unit:4.22 kg; |
| AMI UC321 Insert Bearings Spherical OD | Grease Speed Rating n1:3200 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3200 rpm; Basic Static Radial Load Rating Co:108000 N; Oil Speed Rating n2:4300 rpm; Accessories:Two Shields; Basic Dynamic Radial Load Rating C:138000 N; d:65.000 mm; B:61.90 mm; D:140.0000 mm; |
| AMI UCSTX12-39 Take Up Unit Bearings | Labyrinth ring:2 x LOR 186; da:77.787 mm; Cap bolt, SAE grade:5; Appropriate attachment bolt size G:0.625 in; Pa:8.1 kN; Housing:FSAF 518; Cap bolt recommended tightening torque:149.1 N·m; Ca:49.809 mm; A2:149.225 mm; N1:19.05 mm; |
| AMI MUCHPL205RFB Hanger Unit Bearings | Fillet Radius ra:3.00 mm; D:400.0000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2000 rpm; Basic Dynamic Radial Load Rating C:403000 N; Grease Speed Rating n1:1500 rpm; Basic Static Radial Load Rating Co:600000 N; B:65.00 mm; d:220.000 mm; |
| AMI UCT212-36C4HR5 Mounted Units & Inserts | D:52.0000 mm; Oil Speed Rating Open/Shielded n2:14000 rpm; Sealed Speed Rating n3:7500 rpm; Accessories:Two Seals; d:40.000 mm; Basic Static Radial Load Rating Co:4150 N; Grease Speed Rating Open/Shielded n1:11000 rpm; Basic Dynamic Radial Load Rating C:4940 N; Fillet Radius ra:0.30 mm; B:7.00 mm; |
| AMI UG308-24 Insert Bearings Spherical OD | r3,4 min.:3 mm; Design variant/feature:BC4.10/W33WI; Basic static load rating C0:19300 kN; r1,2 min.:12 mm; F:528 mm; Calculation factor kr:570; D1 ≈:620.7 mm; B:420 mm; D:680 mm; K:9 mm; |
| AMI UENST206-19TCMZ20 Mounted Units & Inserts | Height H:92.1 mm; Width A:38.1 mm; Basic Dynamic Radial Load Rating C:20300 N; Dimension S1:25.4 mm; Distance J:82.6 mm; Dimension F:19.1 mm; Basic Static Radial Load Rating Co:15300 N; Insert Bearing IB:Stainless Steel; Shaft Diameter D:35 mm; Dimension L:104.8 mm; |
| AMI UCST208-24NPMZ2RF Mounted Units & Inserts | Eye bolt:2 x 1/2-13 UNC; Cap bolt recommended tightening torque:4284.4 N·m; P150°:222 kN; h:73.025 mm; Stabilizing ring:2 x A8819; Pa:89 kN; Ca:147.803 mm; A1:228.6 mm; P180°:267 kN; Max. speed for PosiTrac Plus seal:575 r/min; |
| AMI UEWTPL207-20W Mounted Units & Inserts | Basic Radial Load Rating-Static SCO:27400 lbf; Basic Radial Load Rating-Dynamic DC:7600 lbf; Basic Interchange NSK:X421; Basic Interchange BCA:MG305DD; Basic Interchange SPLIT:-; Basic Interchange:-; Basic Interchange MCGILL:BB849; Basic Interchange NDH:ZMG605ATY1Z8; Accessories:Mast Guide Type- 305; |
| AMI UEFPL207-23MZ20RFW Mounted Units & Inserts | rb max.:1 mm; B:14 mm; da max.:25 mm; Limiting speed:16000 r/min; D:47 mm; C:12 mm; Db min.:42 mm; d1 ≈:30.55 mm; Basic static load rating C0:25 kN; Basic dynamic load rating C:34.2 kN; |
| AMI UCST209-26TC Mounted Units & Inserts | G2:G 1/4; B1:355 mm; Hydraulic nut:HMV 126 E; B2:369 mm; Nut for removal:HM 31/630; G1:55 mm; Mass withdrawal sleeve:120 kg; d1:570 mm; G:Tr 630x6; A:11 mm; |
| AMI UCFB206C4HR5 Flange Block Bearings | Basic Static Radial Load Rating Co:3800 N; Sealed Speed Rating n3:8000 rpm; Accessories:Without Accessories; B:7.00 mm; D:47.0000 mm; Basic Dynamic Radial Load Rating C:4750 N; Grease Speed Rating Open/Shielded n1:13000 rpm; Fillet Radius ra:0.30 mm; d:35.000 mm; Oil Speed Rating Open/Shielded n2:16000 rpm; |