| AMI UCFB206C4HR5 Flange Block Bearings | Basic Static Radial Load Rating Co:3800 N; Sealed Speed Rating n3:8000 rpm; Accessories:Without Accessories; B:7.00 mm; D:47.0000 mm; Basic Dynamic Radial Load Rating C:4750 N; Grease Speed Rating Open/Shielded n1:13000 rpm; Fillet Radius ra:0.30 mm; d:35.000 mm; Oil Speed Rating Open/Shielded n2:16000 rpm; |
| AMI UGCJTZ207-20 Flange Block Bearings | Fatigue load limit Pu:1.8 kN; Fw:18 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 18x24x3; Reference speed:20000 r/min; Ew:24 mm; U:12 mm; Basic static load rating C0:15 kN; Basic dynamic load rating C:12.1 kN; Mass needle roller and cage assembly:0.012 kg; Limiting speed:24000 r/min; |
| AMI MUCFT206-19NPRF Mounted Units & Inserts | D:240.0000 mm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:305000 N; Oil Speed Rating n2:2400 rpm; B:92.10 mm; d:110.000 mm; Accessories:One Shield; Sealed Speed Rating n3:1700 rpm; Basic Dynamic Radial Load Rating C:291000 N; Grease Speed Rating n1:1700 rpm; |
| AMI UCSTX10-32 Take Up Unit Bearings | Fillet Radius rb:1.50 mm; B:184.00 mm; D:580.0000 mm; d:320.000 mm; Basic Static Radial Load Rating Co:2400000 N; Oil Speed Rating n2:1200 rpm; Fillet Radius ra:4.00 mm; Basic Dynamic Radial Load Rating C:1050000 N; Grease Speed Rating n1:960 rpm; |
| AMI KHLFL205-16 Flange Block Bearings | Mass needle roller and cage assembly:0.03 kg; Basic dynamic load rating C:20.9 kN; Basic static load rating C0:43 kN; Ew:48 mm; Reference speed:9500 r/min; Fatigue load limit Pu:5.2 kN; U:17 mm; Fw:43 mm; Limiting speed:11000 r/min; |
| AMI MUCFT208NPRF Mounted Units & Inserts | r3,4 min.:3.3 mm; Fatigue load limit Pu:980 kN; Basic static load rating C0:12700 kN; r1,2 min.:1.5 mm; T:400 mm; Basic dynamic load rating C:4840 kN; Thrust factor K:1.34; Calculation factor Y2:2.3; Comparative radial load rating CF:1180 kN; B:400 mm; |
| AMI UCTPL201-8MZ20RFCEW Mounted Units & Inserts | A2:174.625 mm; ba:52.388 mm; RG:3/8 NPT; P60°:128 kN; End plug (suffix Y):EPR 11; H2:50.8 mm; J min.:304.8 mm; P120°:48.9 kN; Da:190 mm; R2:28.575 mm; |
| AMI UCFX20 Flange Block Bearings | J min.:336.55 mm; P60°:185 kN; Initial grease fill:765.45 g; Housing:SAF 620; RG:1/2 NPT; Appropriate attachment bolt size G:0.75 in; P180°:81.4 kN; R2:30.163 mm; Mass pillow block:45.9 kg; Pa:14 kN; |
| AMI MUCHPL205RFB Hanger Unit Bearings | Fillet Radius ra:3.00 mm; D:400.0000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:2000 rpm; Basic Dynamic Radial Load Rating C:403000 N; Grease Speed Rating n1:1500 rpm; Basic Static Radial Load Rating Co:600000 N; B:65.00 mm; d:220.000 mm; |
| AMI UCST206-19NPMZ2RF Mounted Units & Inserts | PG:1/4 NPT; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m; N1:28.575 mm; P180°:96.1 kN; da:130.175 mm; P90°:138 kN; J min.:431.8 mm; End plug (suffix Y):EPR 16; Appropriate attachment bolt size G:1 in; |
| AMI MUCFB206 Flange Block Bearings | RG:3/8 NPT; P60°:149 kN; Da:200 mm; PG:1/4 NPT; Stabilizing ring:SR-22-19; Cap bolt recommended tightening torque:203.4 N·m; Max. speed for Taconite seal:625 r/min; h:45.244 mm; Cap bolt, SAE grade:5; A1:120.65 mm; |
| AMI UCT213C4HR5 Mounted Units & Inserts | Mass shaft washer:0.26 kg; r1,2 min.:1 mm; B:8.25 mm; d1:85 mm; d:45 mm; |
| AMI UKFL206+H2306 Flange Block Bearings | Basic static load rating C0:10800 kN; Mass bearing:507 kg; Limiting speed:1100 r/min; Basic dynamic load rating C:5940 kN; Reference speed:630 r/min; F:547 mm; ra max.:6 mm; s max.:16 mm; d:480 mm; Fatigue load limit Pu:800 kN; |
| AMI MUCHPL206RFB Hanger Unit Bearings | Dimension A1:1.4063 in; Basic Dynamic Radial Load Rating:4560 lbf; Insert Bearing IB:Stainless Steel; Dimension DA:4.1875 in; Basic Static Radial Load Rating Co:3440 lbf; Height T:1.8125 in; Shaft Diameter D:1 1/4 in; Dimension L:4.6250 in; Distance J:3.6250 in; Diameter N:0.5625 in; |