| AMI UEFPL206-18W Flange Block Bearings | Bearing:22218 EK; Ca:49.809 mm; J1:53.975 mm; Adapter sleeve assembly:SNW 18x3.3/16; A2:149.225 mm; da:80.963 mm; L:349.25 mm; R2:27.781 mm; H:192.484 mm; Cap bolt:2 x 5/8-11 UNC; |
| AMI CUCF216C Flange Block Bearings | A1:2.5 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Mass housing:0.34 kg; A2:10 mm; N:11 mm; J:100 mm; H:122 mm; Permissible radial load max.:6.5 kN; D:72 mm; |
| AMI UCST205-16NPMZ2RF Mounted Units & Inserts | Basic Static Radial Load Rating Co:45000 N; Grease Speed Rating Open/Shielded n1:5000 rpm; B:24.00 mm; D:125.0000 mm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:60500 N; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; d:70.000 mm; Oil Speed Rating n2:6000 rpm; |
| AMI UCFB208-24C4HR5 Flange Block Bearings | rb max.:2.5 mm; T:58 mm; d1 ≈:119.9 mm; B:55 mm; ra max.:3 mm; Dimension series:5GD; Reference speed:3200 r/min; Cb min.:13 mm; Calculation factor Y:1.1; Mass bearing:5.56 kg; |
| AMI UCFL210-31TC Mounted Units & Inserts | Labyrinth ring (db shaft position):LOR 79; h:28.575 mm; Housing:SAF 215; RG:1/4 NPT; L:285.75 mm; db:87.313 mm; Bearing:22215 E; Mass pillow block:12.2 kg; Lock washer:W 15; Ca:37.008 mm; |
| AMI MUCHPL201-8CB Hanger Unit Bearings | Threads per inch:8; Mass adapter sleeve assembly:8.85 kg; Lock nut:AN 34; Sleeve:S 34x6; B:27.254 mm; B4:30.963 mm; Lock washer:W 34; B1:122.86 mm; G:169.139 mm; d1:152.4 mm; |
| AMI MUCHPL206-19RFCEB Hanger Unit Bearings | b:6 mm; Axial static load carrying capacity:91.5 kN; Mass lock nut:0.19 kg; d1:61.5 mm; d3:70 mm; Recommended grub screw tightening torque:8 N·m; Associated spanner:HN 10-11; G:M 50x1.5; B:14 mm; h:2.5 mm; |
| Timken 212049 Bearing | Basic dynamic load rating (C):26,5 kN; Brand:CX; B:20 mm; Basic static load rating (C0):9,15 kN; Size (mm):50x90x20; C:20 mm; d:50 mm; Outer Diameter (mm):90; Bearing number:1210; Width (mm):20; |
| AMI UCST208-24NPMZ2 Take Up Unit Bearings | Oil Speed Rating Open/Shielded n2:3800 rpm; Basic Static Radial Load Rating Co:104000 N; D:190.0000 mm; Sealed Speed Rating n3:2200 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Basic Dynamic Radial Load Rating C:133000 N; d:105.000 mm; Oil Speed Rating n2:3800 rpm; Fillet Radius ra:2.00 mm; Accessories:One Shield; |
| AMI UCWTPL208-24W Mounted Units & Inserts | Dimension H1:42.9 mm; Dimension L:152.0 mm; Weight W:1.30 kg; Dimension H2:16.5 mm; Dimension N1:14.0 mm; Basic Dynamic Radial Load Rating C:19500 N; Dimension A1:25.4 mm; Dimension N:23.5 mm; Height H:82.0 mm; Distance JMAX:127.0 mm; |
| AMI UENST205-16TCMZ20 Mounted Units & Inserts | P180°:17.8 kN; H1:82.55 mm; H:157.162 mm; Appropriate attachment bolt size G:0.625 in; H2:30.163 mm; N1:19.05 mm; h:36.513 mm; L:279.4 mm; Max. speed for Taconite seal:1200 r/min; Stabilizing ring:SR-13-11; |
| AMI UG211-35 Insert Bearings Spherical OD | J min.:119 mm; Recommended diameter for attachment bolts, mm G:12 mm; Mass bearing unit:1.45 kg; A5:22 mm; J6:146 mm; Basic static load rating C0:15.3 kN; Housing:SY 507 M/VZ033; J:126 mm; A:45 mm; H:93 mm; |
| AMI UC322 Insert Bearings Spherical OD | J:63 mm; d2:42.3 mm; Basic static load rating C0:69.5 kN; r1,2 min.:0.3 mm; ra max.:0.3 mm; Required attachment bolt size (DIN 912):M6; H1:19 mm; d:30 mm; Preload:2250 N; Da max.:53 mm; |
| AMI UKFCSX20+H2320 Mounted Units & Inserts | P150°:2500 kN; J6:960 mm; ba min.:189 mm; Mass housing:470 kg; P180°:3200 kN; s:30 mm; End cover:ETS 76; db:370 mm; Da:620 mm; P0°:6100 kN; |