| AMI MUCFT208NPRF Mounted Units & Inserts | r3,4 min.:3.3 mm; Fatigue load limit Pu:980 kN; Basic static load rating C0:12700 kN; r1,2 min.:1.5 mm; T:400 mm; Basic dynamic load rating C:4840 kN; Thrust factor K:1.34; Calculation factor Y2:2.3; Comparative radial load rating CF:1180 kN; B:400 mm; |
| AMI MUCHPL204CW Hanger Unit Bearings | Mass roller and cage thrust assembly:3.57 kg; Roller and cage thrust assembly:K 89328 M; Reference speed:670 r/min; Eb:234 mm; Ea:152 mm; Basic dynamic load rating C:640 kN; Dw:19 mm; D:240 mm; Housing washer:GS 89328; d:140 mm; |
| AMI UKFL213+HA2313 Mounted Units & Inserts | R1:5.5 mm; Hexagonal key size for grub screw N:5.556 mm; SWN:11.113 mm; Basic dynamic load rating C:66.3 kN; Thread grub screw G2:7/16-20 UNF; L:279 mm; RG:1/8-27 NPT; Basic static load rating C0:49 kN; N1:22 mm; GN:1/8-27 NPT; |
| AMI UCT202 Take Up Unit Bearings | Basic Static Radial Load Rating Co:15600 N; Grease Speed Rating Open/Shielded n1:9800 rpm; Basic Dynamic Radial Load Rating C:22900 N; Fillet Radius ra:1.00 mm; B:17.00 mm; Accessories:Two Shields & Snap-R; D:62.0000 mm; d:25.000 mm; Oil Speed Rating Open/Shielded n2:12000 rpm; |
| AMI MUCFB206 Flange Block Bearings | RG:3/8 NPT; P60°:149 kN; Da:200 mm; PG:1/4 NPT; Stabilizing ring:SR-22-19; Cap bolt recommended tightening torque:203.4 N·m; Max. speed for Taconite seal:625 r/min; h:45.244 mm; Cap bolt, SAE grade:5; A1:120.65 mm; |
| AMI UCMST206-18MZ2 Mounted Units & Inserts | l7 min.:98 mm; l1 min.:140 mm; d:80 mm; Mass rod end:12 kg; Basic static load rating C0:585 kN; l2 max.:364 mm; Material constant KM:330; Basic dynamic load rating C:400 kN; d2 max.:182 mm; dk:105 mm; |
| AMI KHLFL206-20 Flange Block Bearings | Reference speed:2000 r/min; b1:5 mm; da min.:106 mm; Mass bearing:1.95 kg; Basic dynamic load rating C:209 kN; Basic static load rating C0:400 kN; d1 ≈:116.5 mm; d:100 mm; K:3.5 mm; ra max.:1 mm; |
| AMI UCMFL202MZ2 Mounted Units & Inserts | D:400 mm; B:104 mm; with cylindrical bore:900 min-1; Oil:237.810 kN; Static (Cor):16.7 mm; Grease:572 kN; rs (min):4 mm; Dynamic (Cr):9 mm; with tapered bore:1 200 min-1; Pu:365 kN; |
| AMI UEFBL207-22W Flange Block Bearings | Lock nut:N 060; Threads per inch:6; d:300 mm; G:299.339 mm; d3 max.:360.502 mm; B1:244.602 mm; Mass adapter sleeve assembly:31 kg; d1:277.813 mm; B:39.954 mm; Hydraulic nut:HMVC 60E; |
| AMI BTM201-8 Flange Block Bearings | Grease:279 kN; Dynamic (Cr):3 mm; with cylindrical bore:3 000 min-1; B:43 mm; Static (Cor):5.5 mm; rs (min):2 mm; D:120 mm; Pu:230 kN; d:55 mm; with tapered bore:3 800 min-1; |
| AMI UGCJTZ205-16 Flange Block Bearings | Cb min.:9 mm; r1,2 min.:2 mm; ra max.:2 mm; Calculation factor Y0:0.8; Calculation factor Y:1.5; rb max.:1.5 mm; B:38 mm; Basic static load rating C0:236 kN; Reference speed:4500 r/min; Fatigue load limit Pu:26.5 kN; |
| AMI UEFBL206-20W Flange Block Bearings | Fillet Radius ra:2.00 mm; Accessories:Two Seals & Snap-Rin; d:90.000 mm; D:160.0000 mm; B:30.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Static Radial Load Rating Co:73500 N; Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating n1:3800 rpm; |
| AMI UCST206-20NPMZ20RF Mounted Units & Inserts | B:16 mm; Mass inner ring:0.0094 kg; F:18 mm; d:15 mm; r, r1,2 min.:0.3 mm; |
| AMI UCWTPL208-24W Mounted Units & Inserts | Dimension H1:42.9 mm; Dimension L:152.0 mm; Weight W:1.30 kg; Dimension H2:16.5 mm; Dimension N1:14.0 mm; Basic Dynamic Radial Load Rating C:19500 N; Dimension A1:25.4 mm; Dimension N:23.5 mm; Height H:82.0 mm; Distance JMAX:127.0 mm; |