| AMI UGCJTZ206-18 Flange Block Bearings | Grease Speed Rating n1:12000 rpm; B:16.00 mm; Fillet Radius ra:0.60 mm; Basic Static Radial Load Rating Co:2200 N; D:40.0000 mm; d:17.000 mm; Basic Dynamic Radial Load Rating C:8840 N; |
| AMI UEFCF205-16TCMZ20 Mounted Units & Inserts | Fw:42 mm; Limiting speed:11000 r/min; Fatigue load limit Pu:9 kN; Reference speed:10000 r/min; Mass needle roller and cage assembly:0.054 kg; Basic static load rating C0:76.5 kN; U:30 mm; Basic dynamic load rating C:31.9 kN; Ew:47 mm; |
| AMI UG211-35 Insert Bearings Spherical OD | J min.:119 mm; Recommended diameter for attachment bolts, mm G:12 mm; Mass bearing unit:1.45 kg; A5:22 mm; J6:146 mm; Basic static load rating C0:15.3 kN; Housing:SY 507 M/VZ033; J:126 mm; A:45 mm; H:93 mm; |
| AMI MUCFPL210RFW Mounted Units & Inserts | Accessories:Seal & Snap-Ring; B:9.00 mm; d:15.000 mm; D:32.0000 mm; Fillet Radius ra:0.30 mm; Grease Speed Rating Open/Shielded n1:22000 rpm; Basic Static Radial Load Rating Co:2850 N; Basic Dynamic Radial Load Rating C:5590 N; Oil Speed Rating Open/Shielded n2:28000 rpm; Sealed Speed Rating n3:14000 rpm; |
| AMI UCP213CE Pillow Block Bearings | b1:6.2 mm; r2 min.:1 mm; C:36 mm; d:50 mm; rb max.:1 mm; ra max.:0.6 mm; α:17 °; Lubricant:Regular relubricatio; Basic dynamic load rating C:245 kN; Da max.:84.2 mm; |
| AMI UENST205-16TCMZ20 Mounted Units & Inserts | P180°:17.8 kN; H1:82.55 mm; H:157.162 mm; Appropriate attachment bolt size G:0.625 in; H2:30.163 mm; N1:19.05 mm; h:36.513 mm; L:279.4 mm; Max. speed for Taconite seal:1200 r/min; Stabilizing ring:SR-13-11; |
| AMI UCX11-35 Mounted Units & Inserts | Calculation factor Y:2; Ca min.:6 mm; db min.:142 mm; r1,2 min.:3.5 mm; Db min.:174 mm; T:39.688 mm; Reference speed:2600 r/min; Da min.:165 mm; D:182.562 mm; Calculation factor e:0.3; |
| AMI UKFL213+HA2313 Mounted Units & Inserts | R1:5.5 mm; Hexagonal key size for grub screw N:5.556 mm; SWN:11.113 mm; Basic dynamic load rating C:66.3 kN; Thread grub screw G2:7/16-20 UNF; L:279 mm; RG:1/8-27 NPT; Basic static load rating C0:49 kN; N1:22 mm; GN:1/8-27 NPT; |
| AMI UP000CE Pillow Block Bearings | Grease Speed Rating n1:3200 rpm; Sealed Speed Rating n3:3200 rpm; B:61.90 mm; Oil Speed Rating n2:4300 rpm; Accessories:No Shield, no Seal; d:65.000 mm; Basic Static Radial Load Rating Co:163000 N; D:140.0000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:154000 N; |
| AMI UCFL212-39TC Mounted Units & Inserts | Grease Speed Rating Open/Shielded n1:9000 rpm; Oil Speed Rating n2:11000 rpm; Basic Dynamic Radial Load Rating C:28100 N; D:72.0000 mm; Sealed Speed Rating n3:6300 rpm; Basic Static Radial Load Rating Co:16000 N; B:19.00 mm; Oil Speed Rating Open/Shielded n2:11000 rpm; Accessories:Without Accessories; Grease Speed Rating n1:9000 rpm; |
| AMI KHLFL206-20 Flange Block Bearings | Reference speed:2000 r/min; b1:5 mm; da min.:106 mm; Mass bearing:1.95 kg; Basic dynamic load rating C:209 kN; Basic static load rating C0:400 kN; d1 ≈:116.5 mm; d:100 mm; K:3.5 mm; ra max.:1 mm; |
| AMI UCST212-39TC Mounted Units & Inserts | Attainable speed for oil-air lubrication:38000 r/min; ra max.:1 mm; K:0.5 mm; d1:72.75 mm; B:13 mm; Calculation factor f2C:1.09; Ball diameter Dw:7.938 mm; d:65 mm; Calculation factor f:1.19; Da max.:85.4 mm; |
| AMI UCFL205-15TC Mounted Units & Inserts | Pu:21.300 kN; b1:mm; b:mm; r1s (min):1.1 mm; E:mm; F:148 mm; d2:130 mm; s:2 mm; Dynamic (Ca):162 kN; rs (min):2 mm; |
| AMI UEFK206-18TC Mounted Units & Inserts | Lock nut:HM 30/1000; G:Tr 1000x8; G3:13 mm; B1:430 mm; Mass adapter sleeve assembly:470 kg; Hydraulic nut:HMV 200E; G2:G 1/8; d3:1140 mm; A:10 mm; B:100 mm; |