| AMI UCST211-32NPMZ2 Take Up Unit Bearings | Coefficient of friction µ max.:0.15; Specific static load factor K0:45 N/mm²; d:5 mm; Tolerance shaft:e7; Tolerance housing:H7; Coefficient of friction µ min.:0.08; Mass bushing:0.005 kg; Permissible sliding velocity v max.:0.5 m/s; Specific dynamic load factor K:25 N/mm²; B:10 mm; |
| AMI MUCHPL207CW Hanger Unit Bearings | Shaft washer:WS 89438; Basic dynamic load rating C:1960 kN; Basic static load rating C0:9000 kN; Fatigue load limit Pu:720 kN; da min.:373 mm; Mass bearing:65.7 kg; Reference speed:380 r/min; Da max.:214 mm; B:38.5 mm; Minimum axial load factor A:6.48; |
| AMI UCST206-19NPMZ2RF Mounted Units & Inserts | PG:1/4 NPT; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m; N1:28.575 mm; P180°:96.1 kN; da:130.175 mm; P90°:138 kN; J min.:431.8 mm; End plug (suffix Y):EPR 16; Appropriate attachment bolt size G:1 in; |
| AMI UCPA206NPMZ2RF Mounted Units & Inserts | D:52.0000 mm; Sealed Speed Rating n3:9500 rpm; Grease Speed Rating Open/Shielded n1:13000 rpm; d:20.000 mm; Fillet Radius ra:1.00 mm; Accessories:Metal Shields; Basic Static Radial Load Rating Co:7800 N; Basic Dynamic Radial Load Rating C:15900 N; B:22.23 mm; Oil Speed Rating Open/Shielded n2:16000 rpm; |
| AMI UCFB207C4HR5 Flange Block Bearings | Calculation factor (back-to-back, face-to-face) Y2:1.41; Da max.:104 mm; Number of balls z:25; D2:98.6 mm; Db max.:105.8 mm; Static axial stiffness, preload class A:159 N/µm; Calculation factor f:1.09; Calculation factor (back-to-back, face-to-face) Y1:0.92; Calculation factor fHC:1.01; B:20 mm; |
| AMI MUCHPL207RFCB Hanger Unit Bearings | Preload class B GB:50 N; Preload class D GD:200 N; Db max.:40.6 mm; Basic static load rating C0:4 kN; Static axial stiffness, preload class A:24 N/µm; Calculation factor f2C:1.09; B:9 mm; rb max.:0.2 mm; Calculation factor f2A:1; Static axial stiffness, preload class C:44 N/µm; |
| AMI UC316 Insert Bearings Spherical OD | ra max.:0.15 mm; Fatigue load limit Pu:0.006 kN; D2 ≈:9.9 mm; da max.:6.7 mm; D:11 mm; Limiting speed:60000 r/min; Basic static load rating C0:0.143 kN; da min.:6.2 mm; Basic dynamic load rating C:0.403 kN; Da max.:10 mm; |
| AMI UGCJTZ206-20 Flange Block Bearings | Static (Coa):85.8 kN; r2s (min):0.6 mm; C:23 mm; B:27 mm; a:20 mm; d2:30 mm; T:28.75 mm; D:72 mm; Pu:10.460 kN; rs (min):1.5 mm; |
| AMI UGCJTZ207-20 Flange Block Bearings | Fatigue load limit Pu:1.8 kN; Fw:18 mm; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 18x24x3; Reference speed:20000 r/min; Ew:24 mm; U:12 mm; Basic static load rating C0:15 kN; Basic dynamic load rating C:12.1 kN; Mass needle roller and cage assembly:0.012 kg; Limiting speed:24000 r/min; |
| AMI UCST212-39TC Mounted Units & Inserts | Attainable speed for oil-air lubrication:38000 r/min; ra max.:1 mm; K:0.5 mm; d1:72.75 mm; B:13 mm; Calculation factor f2C:1.09; Ball diameter Dw:7.938 mm; d:65 mm; Calculation factor f:1.19; Da max.:85.4 mm; |
| AMI UCAO312 Pillow Block Bearings | Mass bearing:1.4 kg; r3,4 min.:1 mm; d:55 mm; Basic dynamic load rating C:96.5 kN; Calculation factor kr:0.1; Reference speed:7500 r/min; r1,2 min.:2 mm; D:120 mm; Calculation factor Y0:0.76; Calculation factor Y1:0.92; |
| AMI KHLCTE205-16NP Mounted Units & Inserts | Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3800 rpm; d:85.000 mm; Basic Static Radial Load Rating Co:85000 N; Basic Dynamic Radial Load Rating C:90400 N; Oil Speed Rating n2:4900 rpm; D:150.0000 mm; B:28.00 mm; |
| AMI UCT210-30C4HR5 Mounted Units & Inserts | Grease Speed Rating n1:3500 rpm; Basic Dynamic Radial Load Rating C:62400 N; d:100.000 mm; B:24.00 mm; Basic Static Radial Load Rating Co:68000 N; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:4500 rpm; D:150.0000 mm; |
| AMI UEMT207-23MZ20RF Mounted Units & Inserts | D:250.0000 mm; Oil Speed Rating Open/Shielded n2:3300 rpm; Grease Speed Rating Open/Shielded n1:2700 rpm; Basic Dynamic Radial Load Rating C:203000 N; B:55.00 mm; Accessories:Snap-Ring; Sealed Speed Rating n3:1900 rpm; Fillet Radius ra:3.00 mm; d:95.000 mm; Basic Static Radial Load Rating Co:173000 N; |