| AMI UCFL210-31TC Mounted Units & Inserts | Labyrinth ring (db shaft position):LOR 79; h:28.575 mm; Housing:SAF 215; RG:1/4 NPT; L:285.75 mm; db:87.313 mm; Bearing:22215 E; Mass pillow block:12.2 kg; Lock washer:W 15; Ca:37.008 mm; |
| AMI UCST210-32NPMZ2 Take Up Unit Bearings | Accessories:Shield & Seal; Grease Speed Rating n1:9000 rpm; D:47.0000 mm; B:20.60 mm; Basic Static Radial Load Rating Co:12000 N; Sealed Speed Rating n3:9000 rpm; Oil Speed Rating n2:13000 rpm; Basic Dynamic Radial Load Rating C:19000 N; Fillet Radius ra:1.00 mm; d:20.000 mm; |
| AMI MUCFB206 Flange Block Bearings | RG:3/8 NPT; P60°:149 kN; Da:200 mm; PG:1/4 NPT; Stabilizing ring:SR-22-19; Cap bolt recommended tightening torque:203.4 N·m; Max. speed for Taconite seal:625 r/min; h:45.244 mm; Cap bolt, SAE grade:5; A1:120.65 mm; |
| AMI UEFC207-22 Mounted Units & Inserts | Fillet Radius ra:2.00 mm; D:120.7000 mm; Grease Speed Rating Max. n1:4000 rpm; X-L-O Part Number:115-57; Oil Mist Speed Rating Max. n3:8000 rpm; Keyway e:58.4 mm; Preload:100 lb; d:57.150 mm; B:57.15 mm; Keyway f:4.7 mm; |
| AMI UGCJTZ207 Flange Block Bearings | Reference speed:190 r/min; Basic static load rating C0:18300 kN; Da max.:735 mm; Limiting speed:380 r/min; d1:845 mm; r1,2 min.:4 mm; D1:715 mm; Mass bearing:155 kg; D:850 mm; H:112 mm; |
| AMI UENST205-16TCMZ20 Mounted Units & Inserts | P180°:17.8 kN; H1:82.55 mm; H:157.162 mm; Appropriate attachment bolt size G:0.625 in; H2:30.163 mm; N1:19.05 mm; h:36.513 mm; L:279.4 mm; Max. speed for Taconite seal:1200 r/min; Stabilizing ring:SR-13-11; |
| AMI UKFCSX11+H2311 Mounted Units & Inserts | Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; d:80.000 mm; Basic Dynamic Radial Load Rating C:50700 N; D:125.0000 mm; Sealed Speed Rating n3:3200 rpm; Grease Speed Rating Open/Shielded n1:5300 rpm; B:22.00 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:41500 N; |
| AMI MUCHPL207CW Hanger Unit Bearings | Shaft washer:WS 89438; Basic dynamic load rating C:1960 kN; Basic static load rating C0:9000 kN; Fatigue load limit Pu:720 kN; da min.:373 mm; Mass bearing:65.7 kg; Reference speed:380 r/min; Da max.:214 mm; B:38.5 mm; Minimum axial load factor A:6.48; |
| AMI UCST207-23NPMZ2RF Mounted Units & Inserts | Grease Speed Rating n1:3300 rpm; B:45.00 mm; Basic Static Radial Load Rating Co:156000 N; Basic Dynamic Radial Load Rating C:182000 N; Oil Speed Rating n2:4300 rpm; D:190.0000 mm; Fillet Radius ra:2.50 mm; d:75.000 mm; Fillet Radius rb:1.00 mm; |
| AMI UKP208+HE2308 Pillow Block Bearings | Limiting speed:2200 r/min; Reference speed:1100 r/min; Mass roller and cage thrust assembly:0.93 kg; Eb:146 mm; Shaft washer:WS 89317; Dw:12 mm; Ea:93 mm; Basic dynamic load rating C:255 kN; Roller and cage thrust assembly:K 89317 M; D:150 mm; |
| AMI UCFA207TC Mounted Units & Inserts | Sealed Speed Rating n3:3200 rpm; Basic Dynamic Radial Load Rating C:88400 N; Oil Speed Rating n2:4300 rpm; Grease Speed Rating n1:3200 rpm; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:80000 N; D:125.0000 mm; B:39.70 mm; Fillet Radius ra:1.50 mm; d:70.000 mm; |
| AMI UENST209-27 Mounted Units & Inserts | B:29 mm; Specific dynamic load factor K:100 N/mm²; α:4 °; da max.:29 mm; d1 ≈:29 mm; d:25 mm; da min.:28.3 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Basic static load rating C0:240 kN; D:42 mm; |
| AMI UGF310-31 Flange Block Bearings | Basic Dynamic Radial Load Rating C:14000 N; Insert Bearing IB:ZMaRC; Basic Static Radial Load Rating Co:7800 N; Dimension A2:15.9 mm; Dimension L:95.3 mm; Weight W:0.82 kg; Dimension A1:30.2 mm; Dimension DA:74.6 mm; Diameter N:12.7 mm; Shaft Diameter D:25 mm; |
| AMI UCFB207-22 Flange Block Bearings | Tolerance shaft:e7; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; Coefficient of friction µ min.:0.08; B:10 mm; D:14 mm; Mass bushing:0.008 kg; Coefficient of friction µ max.:0.15; d:9 mm; Permissible sliding velocity v max.:0.5 m/s; |