| AMI UKFL217+H2317 Mounted Units & Inserts | Da max.:160 mm; R:140 mm; D:190 mm; C:17 mm; Mass bearing (including seat washer where applicable):4.85 kg; H1:53 mm; Reference speed:1300 r/min; da min.:166 mm; s:67 mm; Minimum load factor A:1.8; |
| AMI UCAO312 Pillow Block Bearings | Mass bearing:1.4 kg; r3,4 min.:1 mm; d:55 mm; Basic dynamic load rating C:96.5 kN; Calculation factor kr:0.1; Reference speed:7500 r/min; r1,2 min.:2 mm; D:120 mm; Calculation factor Y0:0.76; Calculation factor Y1:0.92; |
| AMI UCST207-21TC Mounted Units & Inserts | H1:360 mm; End cover:ETS 3176 R; Eye bolt, size:2 x M 36; J6:960 mm; da:360 mm; H2:120 mm; A:395 mm; N1:42 mm; Mass housing:470 kg; s:30 mm; |
| AMI UC314-44 Insert Bearings Spherical OD | Grease Speed Rating n1:4300 rpm; d:50.000 mm; Oil Speed Rating n2:5600 rpm; Basic Static Radial Load Rating Co:104000 N; Fillet Radius ra:2.00 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:112000 N; B:54.00 mm; Fillet Radius rb:1.00 mm; |
| AMI UEFC207 Flange Block Bearings | d:80.000 mm; Grease Speed Rating n1:2600 rpm; Basic Static Radial Load Rating Co:236000 N; Fillet Radius rb:1.00 mm; B:78.00 mm; Oil Speed Rating n2:3600 rpm; Basic Dynamic Radial Load Rating C:229000 N; D:170.0000 mm; Fillet Radius ra:2.00 mm; |
| AMI UCFL214TC Mounted Units & Inserts | Basic Static Radial Load Rating Co:23600 N; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:5300 rpm; B:33.00 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:76100 N; Oil Speed Rating n2:6300 rpm; d:40.000 mm; |
| AMI UGCJTZ207-23 Flange Block Bearings | D:180.0000 mm; d:85.000 mm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.50 mm; Oil Speed Rating n2:4300 rpm; B:41.00 mm; Basic Static Radial Load Rating Co:132000 N; Grease Speed Rating n1:3200 rpm; |
| AMI UCFB207-23C4HR5 Flange Block Bearings | B:3 mm; Limiting speed:80000 r/min; Fatigue load limit Pu:0.011 kN; ra max.:0.2 mm; D:10 mm; d1 ≈:5.9 mm; Da max.:8.4 mm; d:4 mm; D1 ≈:8.2 mm; da min.:5.6 mm; |
| AMI UC322 Insert Bearings Spherical OD | J:63 mm; d2:42.3 mm; Basic static load rating C0:69.5 kN; r1,2 min.:0.3 mm; ra max.:0.3 mm; Required attachment bolt size (DIN 912):M6; H1:19 mm; d:30 mm; Preload:2250 N; Da max.:53 mm; |
| AMI UCP213CE Pillow Block Bearings | b1:6.2 mm; r2 min.:1 mm; C:36 mm; d:50 mm; rb max.:1 mm; ra max.:0.6 mm; α:17 °; Lubricant:Regular relubricatio; Basic dynamic load rating C:245 kN; Da max.:84.2 mm; |
| AMI UCSTX13-40NP Take Up Unit Bearings | d:70.000 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:3800 rpm; Basic Dynamic Radial Load Rating C:153000 N; Sealed Speed Rating n3:2800 rpm; Basic Static Radial Load Rating Co:125000 N; D:150.0000 mm; Grease Speed Rating n1:2800 rpm; Accessories:One Shield; B:63.50 mm; |
| AMI UKFL213+HA2313 Mounted Units & Inserts | R1:5.5 mm; Hexagonal key size for grub screw N:5.556 mm; SWN:11.113 mm; Basic dynamic load rating C:66.3 kN; Thread grub screw G2:7/16-20 UNF; L:279 mm; RG:1/8-27 NPT; Basic static load rating C0:49 kN; N1:22 mm; GN:1/8-27 NPT; |
| AMI UCST201-8TC Mounted Units & Inserts | L:118 mm; Basic static load rating C0:15.3 kN; s1:25.4 mm; Recommended diameter for attachment bolts, mm G:12 mm; Mass bearing unit:0.75 kg; Housing material:Composite for food a; Basic dynamic load rating C:21.6 kN; Housing:FYWK 507 Y; A1:17 mm; A:35 mm; |
| AMI UENST205-16TCMZ20 Mounted Units & Inserts | P180°:17.8 kN; H1:82.55 mm; H:157.162 mm; Appropriate attachment bolt size G:0.625 in; H2:30.163 mm; N1:19.05 mm; h:36.513 mm; L:279.4 mm; Max. speed for Taconite seal:1200 r/min; Stabilizing ring:SR-13-11; |