| AMI MUCFB207 Flange Block Bearings | Basic dynamic load rating C:465 kN; d2 max.:162 mm; Basic static load rating C0:490 kN; α:6 °; d:70 mm; r1 min.:1 mm; h:265 mm; Specific dynamic load factor K:150 N/mm²; Material constant KM:330; l2 max.:349 mm; |
| AMI UCAO308-24 Pillow Block Bearings | Mass inner ring:0.053 kg; B:30 mm; r, r1,2 min.:0.3 mm; F:30 mm; d:25 mm; |
| AMI UCFX20 Flange Block Bearings | J min.:336.55 mm; P60°:185 kN; Initial grease fill:765.45 g; Housing:SAF 620; RG:1/2 NPT; Appropriate attachment bolt size G:0.75 in; P180°:81.4 kN; R2:30.163 mm; Mass pillow block:45.9 kg; Pa:14 kN; |
| AMI UFL001 Flange Block Bearings | Threads per inch:12; Mass adapter sleeve assembly:1.45 kg; d:80 mm; B4:16.916 mm; Hydraulic nut:HMVC 16E; B1:81.128 mm; B:15.342 mm; d3 max.:105.689 mm; d1:68.263 mm; Lock nut:AN 16; |
| AMI UELP211TC Pillow Block Bearings | Mass angle ring:0.16 kg; B1:7 mm; d1 ≈:94.4 mm; B2:11 mm; d:75 mm; r3,4 min.:1.5 mm; |
| AMI MUCFT205NPRF Mounted Units & Inserts | Reference speed:430 r/min; s max.:5 mm; Calculation factor e:0.3; Db max.:567 mm; Calculation factor Y:0.4; Mass bearing:44 kg; d:460 mm; B:72 mm; d1 ≈:501 mm; Limiting speed:530 r/min; |
| AMI UG211-35 Insert Bearings Spherical OD | J min.:119 mm; Recommended diameter for attachment bolts, mm G:12 mm; Mass bearing unit:1.45 kg; A5:22 mm; J6:146 mm; Basic static load rating C0:15.3 kN; Housing:SY 507 M/VZ033; J:126 mm; A:45 mm; H:93 mm; |
| AMI UGCJTZ206-20 Flange Block Bearings | Static (Coa):85.8 kN; r2s (min):0.6 mm; C:23 mm; B:27 mm; a:20 mm; d2:30 mm; T:28.75 mm; D:72 mm; Pu:10.460 kN; rs (min):1.5 mm; |
| AMI UCFB208C4HR5 Flange Block Bearings | Mass bearing:1.12 kg; d1:117.38 mm; d:100 mm; Basic dynamic load rating C:44.9 kN; r1,2 min.:1.5 mm; Static axial stiffness, preload class C:212 N/µm; Ball diameter Dw:12.7 mm; Calculation factor f1:1; Preload class C GC:1440 N; Static axial stiffness, preload class B:154 N/µm; |
| AMI UKFL205+HA2305 Mounted Units & Inserts | Calculation factor e:0.37; T:39.5 mm; ra max.:1.5 mm; Calculation factor Y1:1.8; 2B:36 mm; Da max.:72.5 mm; Calculation factor Y0:1.8; r5 min.:0.6 mm; r3,4 min.:1.5 mm; Basic dynamic load rating C:130 kN; |
| AMI UCFL202-10C4HR23 Flange Block Bearings | d:95.000 mm; Basic Static Radial Load Rating Co:64000 N; D:200.0000 mm; Basic Dynamic Radial Load Rating C:165000 N; Grease Speed Rating n1:2600 rpm; Fillet Radius ra:2.50 mm; B:67.00 mm; Oil Speed Rating n2:3200 rpm; |
| AMI UEPPL210CB Mounted Units & Inserts | Basic Static Radial Load Rating Co:108000 N; D:190.0000 mm; Grease Speed Rating n1:3400 rpm; Basic Dynamic Radial Load Rating C:143000 N; Sealed Speed Rating n3:2400 rpm; Oil Speed Rating Open/Shielded n2:4000 rpm; Oil Speed Rating n2:4000 rpm; B:43.00 mm; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:3400 rpm; |
| AMI UEFBL206-20W Flange Block Bearings | Fillet Radius ra:2.00 mm; Accessories:Two Seals & Snap-Rin; d:90.000 mm; D:160.0000 mm; B:30.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Static Radial Load Rating Co:73500 N; Basic Dynamic Radial Load Rating C:95600 N; Grease Speed Rating n1:3800 rpm; |
| AMI UENST209-27 Mounted Units & Inserts | B:29 mm; Specific dynamic load factor K:100 N/mm²; α:4 °; da max.:29 mm; d1 ≈:29 mm; d:25 mm; da min.:28.3 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; Basic static load rating C0:240 kN; D:42 mm; |