| No. | Brand | N | h | B | D | E | L | T | S |
| UENTPL206-18CW | AMI | - | - | 62 mm | 200 mm | - | - | - | - |
| KHLCTE205-16NP | AMI | - | - | 28.00 mm | 150.0000 mm | - | - | - | - |
| MUCHPL205-14RFCEW | AMI | - | - | 17 mm | 62 mm | - | - | - | - |
| UCFL210-31NPMZ2RF | AMI | - | - | 14.3 mm | - | - | - | - | - |
| MUCHPL204CW | AMI | - | - | - | 240 mm | - | - | - | - |
| UG308-24 | AMI | - | - | 420 mm | 680 mm | - | - | - | - |
| UKFL217+H2317 | AMI | - | - | - | 190 mm | - | - | - | - |
| UG207-20RT | AMI | - | - | 17.00 mm | 72.0000 mm | - | - | - | - |
| UELP211TC | AMI | - | - | - | - | - | - | - | - |
| UCFL211C4HR23 | AMI | - | 62.706 mm | - | - | - | - | - | 4.763 mm |
| UCFA210-30TC | AMI | - | - | - | - | - | - | - | - |
| MUCFB207 | AMI | - | 265 mm | - | - | - | - | - | - |
| UCSTX13-40NP | AMI | - | - | 63.50 mm | 150.0000 mm | - | - | - | - |
| UCFL218 | AMI | - | - | 52.40 mm | 120.0000 mm | - | - | - | - |
| UC213C4HR5 | AMI | - | - | - | - | - | - | - | - |
| UEFC206-20 | AMI | - | - | 33.34 mm | 100.0000 mm | - | - | - | - |
| UEFC210-32 | AMI | - | - | - | - | - | 831.85 mm | - | - |
| UCST203TC | AMI | - | - | 34.90 mm | 80.0000 mm | - | - | - | - |
| UEFBL206-20W | AMI | - | - | 30.00 mm | 160.0000 mm | - | - | - | - |
| UEFC205 | AMI | - | - | 33.00 mm | 250.0000 mm | - | - | - | - |
| UGCJTZ206-18 | AMI | - | - | 16.00 mm | 40.0000 mm | - | - | - | - |
| UEFC206-19 | AMI | - | - | 28.829 mm | - | - | - | - | - |
| UCWTPL207-23W | AMI | - | - | - | - | - | - | - | 4.763 mm |
| UCT202 | AMI | - | - | 17.00 mm | 62.0000 mm | - | - | - | - |
| UCST206-19NPMZ20 | AMI | - | - | 30.20 mm | 72.0000 mm | - | - | - | - |
| MB4-12 | AMI | - | - | - | - | - | - | - | - |
| MUCHPL206-20CEW | AMI | - | - | - | 160 mm | - | - | - | - |
| AMI UCFB208C4HR5 Flange Block Bearings | Mass bearing:1.12 kg; d1:117.38 mm; d:100 mm; Basic dynamic load rating C:44.9 kN; r1,2 min.:1.5 mm; Static axial stiffness, preload class C:212 N/µm; Ball diameter Dw:12.7 mm; Calculation factor f1:1; Preload class C GC:1440 N; Static axial stiffness, preload class B:154 N/µm; |
| AMI UFL004 Flange Block Bearings | S:4.763 mm; P120°:249 kN; dc:193.675 mm; Appropriate attachment bolt size G:1.5 in; Bearing limiting speed:1500 r/min; Housing:SAFS 340; P150°:222 kN; ba:103.188 mm; Mass pillow block:417 kg; R2:50.8 mm; |
| AMI UEWTPL207-20W Mounted Units & Inserts | Basic Radial Load Rating-Static SCO:27400 lbf; Basic Radial Load Rating-Dynamic DC:7600 lbf; Basic Interchange NSK:X421; Basic Interchange BCA:MG305DD; Basic Interchange SPLIT:-; Basic Interchange:-; Basic Interchange MCGILL:BB849; Basic Interchange NDH:ZMG605ATY1Z8; Accessories:Mast Guide Type- 305; |
| AMI UCFA207-22TC Mounted Units & Inserts | Basic static load rating C0:134 kN; l5 ≈:25 mm; Basic dynamic load rating C:80 kN; w:41 mm; G:M 36x3; l4 max.:174 mm; Specific dynamic load factor K:100 N/mm²; d2 max.:84 mm; B:25 mm; r1 min.:0.6 mm; |
| AMI MUCFT207-22NPRF Mounted Units & Inserts | B:25.4 mm; Basic static load rating C0:106 kN; Cb min.:4.5 mm; r3,4 min.:0.8 mm; Basic dynamic load rating C:99.1 kN; Ca min.:5 mm; db min.:57 mm; d1 ≈:62.2 mm; C:19.05 mm; a:16.993 mm; |
| AMI KHP209-26 Mounted Units & Inserts | Hexagonal head bolt:M 10x20; M2:24 mm; M1:5 mm; Mass locking clip:0.055 kg; Spring washer in accordance with DIN 128:A 10; B:28 mm; M:15 mm; M3:12 mm; |
| AMI MUCHPL206-20CEW Hanger Unit Bearings | D:160 mm; C:14 mm; Basic dynamic load rating C:125 kN; H1:45 mm; s:65 mm; D3:165 mm; Basic static load rating C0:365 kN; H:40.2 mm; Minimum load factor A:0.79; d1 ≈:160 mm; |
| AMI UCMFB206-17MZ2RF Mounted Units & Inserts | Sealed Speed Rating n3:10000 rpm; Grease Speed Rating Open/Shielded n1:16000 rpm; D:42.0000 mm; Oil Speed Rating Open/Shielded n2:19000 rpm; Accessories:Two Shields; B:9.00 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:6630 N; d:25.000 mm; Basic Static Radial Load Rating Co:4150 N; |
| AMI UCFL217-52 Flange Block Bearings | Limiting speed:5300 r/min; T:26.25 mm; rb max.:1.5 mm; Cb min.:5 mm; Calculation factor Y:1.4; ra max.:2 mm; Dimension series:3EB; db min.:80.5 mm; Basic static load rating C0:156 kN; Basic dynamic load rating C:155 kN; |
| AMI MUCHPL202RFB Hanger Unit Bearings | Fillet Radius rb:1.00 mm; Oil Speed Rating n2:1500 rpm; B:104.00 mm; Basic Static Radial Load Rating Co:710000 N; D:320.0000 mm; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:1100 rpm; Basic Dynamic Radial Load Rating C:449000 N; d:180.000 mm; |
| AMI KHLP211 Mounted Units & Inserts | D:140 mm; ra max.:1.5 mm; da min.:97 mm; D1:124.6 mm; Db max.:136 mm; Static axial stiffness, preload class B:141 N/µm; rb max.:1 mm; Calculation factor f:1.14; d2:105.4 mm; Calculation factor f2D:1.09; |
| AMI UCSTX09-28 Take Up Unit Bearings | Dimension N1:11.5 mm; Width A:32.0 mm; Dimension L:126.0 mm; Dimension H1:33.3 mm; Basic Static Radial Load Rating Co:6550 N; Shaft Diameter D:20 mm; Dimension A1:21.0 mm; Height H:64.0 mm; Dimension S1:18.3 mm; Distance JMIN:91.5 mm; |
| AMI UCMFL210-31MZ2 Flange Block Bearings | Basic Static Radial Load Rating Co:173000 N; Basic Dynamic Radial Load Rating C:178000 N; Oil Speed Rating n2:4800 rpm; B:66.00 mm; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:3700 rpm; D:140.0000 mm; Fillet Radius ra:2.00 mm; d:65.000 mm; |
| AMI UGCJO318 Mounted Units & Inserts | Span B:2.109 in; Dimension C:1.5000 in; Basic Radial Load Rating-Dynamic DC:1990 lbf; MRC Bearing Number (MRC) :S2500; MRC Bearing Number (MRC):CONV-504-3; Total Length A:2.500 in; Basic Radial Load Rating-Static SCO:1270 lbf; Variant:CONV-504-3; |
Timken 212049 Bearing Video
HM212049 - HM212011 - Timken CAD
HM212049 - HM212011. This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring)
Timken SET413 Wheel Bearing Cup & Cone Set, Includes
Timken SET413 Wheel Bearing Cup & Cone Set, Includes HM212011 & ... This Timken bearing kit includes a HM212011 bearing cup and HM212049 bearing
Timken HM212049 Tapered Roller Bearing Inner Race
Timken HM212011 Tapered Roller Bearing Outer Race Cup, Steel, Inch, 4.813" Outer Diameter, 1.1700" Cup Width. ... Timken HM218210 Tapered Roller Bearing Outer Race Cup, Steel, Inch, 5.786" Outer Diameter, 1.2795" Cup Width. ... This Timken HM212049 single cone with a stamped steel cage
Timken - HM212049-20024 - Motion Industries
Buy Timken Tapered Roller Bearing Cones HM212049-20024 direct from ... Timken - HM212049-20024 - Tapered Roller Bearing Cone - 2.6250 in ID, 1.5100
HM212049/11 TIMKEN tapered roller bearing set, HM 212049
Apr 25, 2018 - HM212049/11 Bearing is inch size tapered roller bearing , TIMKEN bearing part number is HM212049 – HM212011. It consists of two main
Timken (HM212049/HM212011) Tapered Roller Bearing Cup
Timken HM212049 Tapered Roller Bearing Inner Race Assembly Cone, Steel, Inch, 2.6250" Inner Diameter, 1.510" Cone…. ... KML Set 413 (HM212049/HM212011) TAPER ROLLER BEARINGS - INCH SIZE FACTORY NEW! ... Timken HM212049/HM212011 (Set 413) 900SA Tapered Roller Brearing Assembly, Cone and Cup